Winget 4B2000, Operator'S Handbook Manual

Page: 28 / 282

SERVICE 3.3
SERVICE SCHEDULE
SERVICE OPERATION REFERENCE PAGE
Every 125 operating hours,
the above and the following
Air cleaner element Engine 3.9
Every 250 operating hours
,
the above and the following
Engine oil and filter Engine 3.5
Fuel filter Engine 3.7
Every 300 operating hours,
the above and the following
Hydraulic oil filter Hydraulic system 3.17
Every 500 operating hours
, the above and the following
Air cleaner element Engine 3.9
Fuel filter Engine 3.7
Frame assembly bolts Check all structural nuts & bolts for tightness.
Every 1000 operating hours,
the above and the following
Hydraulic oil & filter Hydraulic system 3.17
Gearbox / Transfer box oil change Gearbox / Transfer box 3.10
Axle oil change Axles 3.23
Every 2000 operating hours, or 2 years
, the above and the following
Brake system overhaul Braking system 3.20
Extra services
Dirty working conditions
Increase the frequency of all services during extremes of dirt, heat and cold,
especially those relating to clean air, cooling efficiency, lubrication and machine
cleanliness.
Laying-up protection
When a machine is to remain idle, remove the battery to the workshop. Seal all
openings: air intake, exhaust breathers. Grease bright parts and protect rubber
components from direct sunlight. Fill the fuel tank, check the tyre pressures
and exhaust any pressure from the hydraulic system.