Winget 2B1500, Operators Handbook & Parts, Page: 31 / 170

Safe handling of oils
Do not allow oils to come
into regular contact with
skin. This can lead to
serious skin diseases.
Medical evidence suggests
they may include skin
cancer.
Always wear protective
gloves when handling oils
for topping up, draining, or
refilling.
Dispose of waste oil into
waste oil storage tanks. if
storage tanks are not
available, consult your
Distributor or local authority
for addresses of local
designated disposal points.
It is illegal to dispose of
waste oil into drains or
water courses or to bury it.
Every 50 operating hours, or
weekly
Check gearbox oil level
Check the gearbox oil level when the
machine has stood for 2 minutes.
Clean the area around the dipstick/filler
(V) before removing.
Remove the dipstick and check the oil
level. Top-up between the two marks
(W). It is most important not to overfill.
For the correct type and grade of oil,
see "Specifications".
Every 1000 operating hours
Change gearbox oil
Clean the areas surrounding the dipstick
(V) and drain plugs (X).
Place a suitable container beneath the
drain plug.
CAUTION: Before removing the drain
plug be sure to stand to one side to avoid
the oil that will spill from the hole.
Remove the drain plug
(X) and drain the
gearbox. (Do not lose its sealing
washer)
Replace drain plug with its sealing washer.
Remove the dipstick
(V) from the filler
hole.
Fill with oil. Check that the final level is
between the two marks on the dipstick.
It is most important not to overfill.
For the correct type and grade of oil,
see "Specifications".
ENGINE
3.8 SERVICE