Winget 2B1000 Operators Handbook & Parts Download

Page: 48 / 288

TECHNICAL INFORMATION

4.3

SPECIFICATIONS

ENGINES

up to 1985

Petter PH1:

“See relevent Engine Operator’s handbook”

Lister ST:

“See relevent Engine Operator’s handbook”

1985 to 1989

Lister-Petter PH1:

“See relevent Engine Operator’s handbook”

1989 to date

Lister-Petter TS/TR1: Single cylinder, direct injection, naturally aspirated,

flywheel fan air cooled diesel.

Rotation: Anti-clockwise when looking on the flywheel.

TR1:

Power output: 6.7 kW (9 bhp) @ 1800 rev/min.

TS1:

Power output: 5.4 kW (7.3 bhp) @ 1800 rev/min.

Note:

From 1989 to

date the Lister-Petter

TS1

has been offered as an option

ELECTRICS

(Where fitted)

12 volt negative earth.

FUEL SYSTEM

System:

Single element fuel pump.

Fuel specification:

BS 2869:1988 Class A2, or BS EN590:1995 Class A1.

Fuel tank capacity:

8.25 litres

Fuel filter:

Strainer within fuel tank.

Air cleaner:

Renewable element.

AXLES

Front:

Heavy duty with fully floating half shafts.

Rear:

Centrally pivoted steer axle (without brakes).

BRAKES

Service:

Front axle braking. Totally sealed oil immersed
multi-plate disc brakes, featuring fully automatic
adjustment for wear.

Parking:

Hand operated, ratchet type, actuating disc brake on
transmission.

TRANSMISSION

Heavy duty constant mesh gearbox, with 3 forward and 1 reverse gear.

HYDRAULICS

Pump:

Gear type.

Control valve:

Sectional or monobloc with pressure relief valve.

Filter:

Suction strainer mounted within the hydraulic tank.

Summary of Contents for 2B1000

































































































































































































































































































Search results

Summary of Contents for 2B1000

Reviews:

Related manuals for 2B1000

Brands by name

Popular brands

Winget 2B1000, Operators Handbook & Parts

Search results

Summary of Contents for 2B1000

Reviews:

Related manuals for 2B1000

Brands by name

Popular brands