WinGD X92DF, Operation Manual

Page: 574 / 608

11.1 Engine data
The standard data of the X92DF engine is given in Table 11-1 - General data .
Tab 11-1 General data
Item Value Unit
Cylinder bore 920 mm
Piston stroke 3468 mm
Speed range 70 to 80 rpm
Stroke / bore ratio 3.77 -
Available number of cylinders 6 to 12 -
Number of pulses for cylinder pre-lubrication 245 -
Table 11-2 - Rated power gives the data that follow:
• Rating point
For the rating points refer to Figure 11-1 .
• Speed
This list gives the speed of the crankshaft in rpm.
• Power
The power in kW for each cylinder refers to the ISO standard reference conditions:
○ Total barometric pressure is 1.0 bar
○ Suction air temperature is 25°C
○ Relative humidity is 30%
○ Cooling water temperature at the engine inlet is 25°C.
•
BSFC
This list gives the Brake Specific Fuel Consumption (BSFC) for fuel of lower heating value
42.7 MJ/kg (10 200 kcal/kg) and standard tuning.
•
BSGC
This list gives the Brake Specific Gas Consumption (BSGC) for fuel of lower heating
value 50.0 MJ/kg (11 942 kcal/kg) and standard tuning.
•
BSPC
This list gives the Brake Specific Pilot fuel Consumption (BSPC) for pilot fuel (in gas
mode) of lower heating value 42.7 MJ/kg (10 200 kcal/kg) and standard tuning.
•
Mean piston speed
This list gives the mean piston speed in m/s.
•
MEP
This list gives the Mean Effective Pressure (MEP) in the combustion chamber in bar.
•
Firing pressure
This list gives a guide value for the firing pressure in the combustion chamber in bar. The
firing pressure can be lower than the guide values in the table.
X92DF
AA00-0000-00AAA-030A-A
Operation Manual Engine data
Winterthur Gas & Diesel Ltd.
- 574 - Issue 002 2020-08