WINEL Musketeer Hatch, Installation, Operation & Maintenance Manual

Page: 16 / 22

6 Maintenance
Do the maintenance to keep the product safe and reliable. Refer to the maintenance
schedule.
Caution:
Only use WINEL genuine spare parts or parts advised by WINEL
Note:
• All bushes used in hinges and/or cleats are maintenance-free bushes that
do NOT require lubrication.
• WINEL BV can offer you a service contract. For example, the products can
be examined and, when necessary, serviced every 3 – 5 years by a
service engineer of WINEL BV.
6.1 Maintenance schedule
Monthly (depending on the frequency of use):
Examine the parts that follow. If any bearing bush is worn, replace it.
• Hinges
• Handle
• Cleats
• Wedges
Examine the rubber gasket. If you see cracks or other visual damage, replace the rubber
gasket.
6.2 Maintenance tasks
6.2.1 Replace the rubber gasket
Procedure
1. Remove the old rubber gasket.
2. Remove the remainder of the glue.
3. Apply glue to the gutter (A) and the
new gasket (B). Refer to the
instructions of the glue manufacturer.
4. Install the new rubber gasket.
Closing requirements
1. Make sure that the compression of
the rubber gasket is correct to make
sure that the hatch is watertight:
Adjust the cleats. Refer to section
Adjust the cleats
on page 17.
A B
Maintenance
16 22 - 001 - 15.01.2021