INSTALL GUIDE
WIFIRANGER OSPREY
Confirm you own a Winegard .
Remove the Osprey from it’s packaging.
You will see the Osprey, mounting plate, screws and
adhesive tape for mounting to the RV ceiling.
Locate the Pre-Wire cap in the ceiling of your RV and
remove the cap.
Confirm there are 4 wires to plug into the Osprey:
Red, Yellow, Green and a Black power cable.
Attach the Osprey mounting plate using the tape
and screws, using the existing screw holes from the
Winegard Air 360+ ceiling port access.
Connect the wires to the proper ports by color
on the Osprey.
Attach the wire housing to the Osprey mounting plate.
Attach the Osprey to the mounting plate following
the diagram on the bottom of the mounting plate.
Power the unit on.
1
2
3
4
5
6
7
8
