Winegard TRAV'LER DIRECTV SK-SWM3 Installation Manual Download Page 8

FIGURE 10.

  Stowed/travel position

7

WINEGARD MOBILE PRODUCTS LIMITED WARRANTY

(2 YEARS PARTS; 1 YEAR LABOR)

 

Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original 

purchase. During year one (1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair 
or replace defective products.  No warranty claim will be honored unless at the time the claim is made, Customer presents proof of purchase to 
an authorized Winegard dealer (to locate the nearest authorized Winegard dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, 
Iowa 52601, Telephone 800-288-8094 or visit www.winegard.com). Customer must provide proof of purchase with a dated sales receipt for the 
Winegard product to verify the product is under warranty. If the date of purchase cannot be verified, the warranty period shall be considered to 
begin thirty (30) days after the date of manufacture.
  If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer 
must provide proof of purchase to verify the product is under warranty.  If the product is brought to an authorized Winegard dealer for service 
prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, 
Winegard Company will cover the Winegard dealer’s labor charges for warranty service. The Winegard dealer must contact Winegard Technical 
Services in advance for pre-approval of the service.  Approval of the service is at the sole discretion of Winegard Company.  
  Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located at 3111 Kirkwood Street, Burlington, Iowa 52601, 
Telephone 800-788-4417). Customer must return the product along with a brief description of the problem and provide Winegard Technical Services 
with Customer’s name, address, and phone number. Customer must also provide proof of purchase to verify the product is under warranty. If 
the product is returned before the expiration of the warranty period, Winegard Company will (at its option) either repair or replace the product.  
  This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from:  improper installation, misuse, 
abuse, neglect, accident, tampering, modification of the product as originally manufactured by Winegard in any manner whatsoever, removing or 
defacing any serial number, usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice 
or corrosive environments such as salt spray and acid rain. This Limited Warranty also does not apply if the product becomes unable to perform 
its’ intended function in any way as a result of the television signal provider making any changes in technology or service. 
 

RETURN AUTHORIZATION POLICY

   A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under 
this warranty policy. Please call our Technical Services Department at 800-788-4417 or send an e-mail to [email protected] to obtain 
the RMA number. Please furnish the date of purchase when requesting an RMA number.  Enclose the product in a prepaid package and write 
the RMA number in large, clear letters on the outside of the package.  To avoid confusion or misunderstanding, a shipment(s) without an RMA 
number(s) or an unauthorized return(s) will be refused and returned to Customer freight collect.
  WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER 
PERSON.
  ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.
  In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above 
limitations or exclusions do not apply.
  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential 
damages, so the above limitations or exclusions may not apply to you.
  This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state.

SATELLITE RECEIVER WARRANTY

 See manufacturer’s limited warranty policy.

WS-MOBWARREV2

Rev. 1/10

Installing the Reflector, Cont.

1. Press “POWER,” and hold for two seconds to turn on the interface box. Wait until the interface box finishes 

“connecting to antenna.” The TRAV’LER antenna may enter the search routine after ten seconds. 

Pay attention to the 

pinch points as the antenna raises.

2. As the antenna raises, press “POWER” and “SELECT” at the same time. The antenna should stop moving.

3. Line up the four holes on the reflector with the four holes on the mounting 

bracket. Insert the four reflector bolts through the four holes on the front 
of the reflector. Thread a nut onto each bolt, and tighten the nuts. 

4. Press and hold “POWER” for two seconds to power on the unit. 

Press “POWER” again until the interface displays “Stowing...”; this 
should lower the antenna to the stowed/travel position (see fig. 10). 

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 • 1-800-288-8094 • Fax 319-754-0787

www.winegard.com • Printed in U.S.A. ©2012 Winegard Company Rev3 2/14  2452282

Winegard and TRAV’LER are registered trademarks of Winegard Company. DIRECTV is a registered trademark of DIRECTV, LLC.

Disclaimer:

 Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions 

in this manual. Information provided in this manual was accurate at time of printing. The satellite interface is designed specifically for use with motorized recreational vehicles, and 
information contained herein is provided for that purpose only.

Summary of Contents for TRAV'LER DIRECTV SK-SWM3













Reviews: