8
ELEVATING SHAFT & WORM GEAR ASSEMBLY REPLACEMENT PROCEDURE
NOTE: It is not necessary to remove rotating gear housing from base plate or remove antenna from
roof to replace the shaft & worm gear assembly .
Step 1:
Lower antenna to travel position. Loosen set screw on elevating crank, remove crank, spring,
directional handle.
Step 2:
Remove top retaining ring from top pin holding
top
elevating tube in rotating gear housing and
remove pin.
Step 3:
Remove plastic plug from top of rotating gear housing, disengage elevating gear, remove elevating
shaft assembly .
Step 4:
Lubricate worm gear assembly on new elevating shaft assembly with spray silicone lubricant,
make sure wave washer, flat washer and quad ring are on lower bearing
and insert assembly in housing.
Step 5:
Reinstall plastic plug in top of housing. Gears will mesh automatically once elevating crank is
turned.
Step 6:
Replace directional handle, spring and elevating crank. Make sure set screw contacts flat surface
on shaft before tightening.
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000 © Winegard Company, 2004, 2005 2452013 Rev. 10/05
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY
(2 YEARS PARTS; 1 YEAR LABOR)
Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase. During
year one (1) of such warranty, Winegard Company will also pay authorized labor costs to repair or replace defective products. No warranty claim will be honored
unless at the time the claim is made, Customer presents proof of purchase to an authorized Winegard dealer (to locate the nearest authorized Winegard
dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 319-754-0600). It is Customer’s responsibility to verify the
date of purchase by returning the warranty card included with the product to Winegard within thirty (30) days of the purchase. If a warranty card is not returned,
Customer must provide proof of purchase with a dated sales receipt for the Winegard product to verify the product is under warranty. If the date of purchase
cannot be verified, the warranty period shall be considered to begin thirty (30) days after the date of manufacture.
If a defect in material or workmanship is discovered and the product is returned before the expiration of the Warranty Period, Winegard Company will (at its
option) either repair, replace or refund the purchase price of the product at no charge to Customer. Customer may mail or personally deliver the product to
Winegard Warranty Services (located at 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 319-754-0600). Customer must return the product along
with a brief description of the problem and provide Winegard Warranty Services with Customer’s name, address, and phone number. If the warranty card
is not on file for the particular product, Customer must also provide proof of purchase to verify the product is under warranty.
Alternatively, Customer may take the product to a Winegard Dealer for repair. If the warranty card is not on file for the particular product, Customer must
provide proof of purchase to verify the product is under warranty. If the product was installed by a Winegard Dealer and is brought to a Winegard Dealer for
repair prior to expiration of year one (1) of the Warranty Period, Winegard Company will cover the Winegard Dealer’s labor charges for warranty repairs,
provided the Winegard Dealer contacts Winegard Company in advance for pre-approval of the charges. Approval of the charges is in the sole discretion of
Winegard Company. If approval is denied, Customer must mail or personally deliver the product to Winegard Warranty Services.
This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from: improper installation, misuse, abuse, neglect,
accident, tampering, modification of the product as originally manufactured by Winegard in any manner whatsoever, removing or defacing any serial number,
usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt
spray and acid rain.
RETURN AUTHORIZATION POLICY
A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this warranty
policy. Please call our Technical Services Department at (800) 788-4417 or send an e-mail to
to obtain the RMA number. Please
furnish the date of purchase when requesting an RMA number. Enclose the product in a postage-paid package and write the RMA number in large, clear
letters on the outside of the package. To avoid confusion or misunderstanding, shipments without an RMA number or unauthorized returns will be refused
and returned to Customer freight collect.
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER
PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.
In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations or
exclusions do not apply.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state.
SATELLITE RECEIVER WARRANTY:
See manufacturer’s limited warranty policy.
Rev. 10/05
