Operation -
5GHz Antenna Activation
7
5GHz Antenna Activation
–
Allows higher speed but reduces range.
1) Turn on the WiFi-enabled device(s) that you want to connect and scan for wireless
networks.
It may take a few minutes for the network to appear.
2) The label located on the front of the Quick Start Guide or bottom of the unit has the unique
default SSID and password. Select this WiFi signal from the list of wireless networks
and connect. Once the correct SSID has been selected, enter the listed password. We
recommend you set your device(s) to automatically connect with the Winegard Extreme 2.0.
3) Once connected, open an internet browser on your device and type
10.11.12.1
into the
address bar and press ENTER (Figure 13).
This will take you to the Admin Login screen (Figure 14).
Login using:
Username:
admin
Password:
admin
.
4)
INTERNET ACCESS
– WIFI will need to be selected. Press SCAN FOR WIFI (Figure 15).
5) Enter the network password, if prompted (Figure 16). Once the Winegard Extreme 2.0
connects to the internet, the Internet Status will show CONNECTED.
This could take as
long as two minutes.
You are now ready to use the WiFi and will see your paired info in
Internet Status and strength in WiFi Signal.
Figure 13
Figure 14
Figure 16
Figure 15