STEP 2
Connecting power supply
1. Plug the end of the
power cord into the
socket on the back of
the device.
2. Insert the plug into the
socket.
3. Verify that there is
electricity.
4. Turn on the device
operation switch.
is ready to
use.
STEP 3
Replacing the Co2 cylinder
INTERNAL Co2 cylinder
1.
Turn off the device.
2.
Open the rear door and remove the
Co2 cylinder.
3.
Unscrew the empty CO2 cylinder from
the regulator and screw the new
cylinder onto the regulator.
4.
Place the new Co2 cylinder with the
regulator in the back door.
5.
Close the rear door
6.
Turn on the device.
EXSTERNAL Co2 cylinder
1. Close the Co2 bottle
.
2. Push the Co2
nozzle inwards to
empty the Co2
circuit.
3. Turn off the
device.
4. Unscrew the
regulator and
screw in the new
Co2 bottle.
5. After checking that all
connections are tight,
reopen the Co2 tap.
6. Turn on the device.
Illuminated
nozzles:
The D
system is equipped
with illuminated nozzles.
By pressing the "+" and "-" buttons you can
change the intensity of the chosen colour.
By pressing the coloured capacitive button, it
is possible to interchange 7 different colours.
Regardless of the selected colour, during the
reclosing and pressurization process, the
nozzle turns red and then green once the
operation is complete.
Once the bottle is removed, the nozzles will
return to the set colour.
TECHNICAL INFORMATION:
Model: DURACOMBI
Degree of protection: Class III
Freq./Volt.: 100-240VAC
24VAC, 50/60Hz
Vacuum pressure: -0.6 bar
Current: 1.4A
2.5A
Co2 pressure: +1.6 bar
Power: 90W
Acoustic pressure: 75 db(A) max
Winefit SrL
www.winefit.com -
Headquarters: Località Drove, 2 / G - 1 'Internal floor 4053036 - Poggibonsi - Siena - Italy
Plant and Offices: Via G. Mazzini 70 - 21020 Ternate - Varese - Italy
P VAT number 05989390488