STEP 1
Connecting the regulator to the Co2
cylinder
INTERNAL Co2 cylinder
The regulator has a universal
fitting that fits all standard Co2
cylinders (W21.8X1/14”
thread). - In case of any other
Thread / pitch contact the
technical service for
assistance.
The working pressure is pre-
set and doesn’t require an
adjustment process.
1. Open the
back door.
2. Take the pressure
regulator and connect
it to the hose. Gently
screw the pressure
regulator onto the
cylinder thread.
3. Place the Co2 cylinder
inside the
compartment and
attach the cylinder to
the adjustable strap.
4. Close the back door.
EXSTERNAL Co2 cylinder
The regulator has a universal fitting that fits all
standard Co2 cylinders (W21.8X1/14” thread). - In
case of any other Thread / pitch contact the technical
service for assistance.
The working pressure is pre-
set and doesn’t require an
adjustment process.
Make
sure that the pressure is 2 bar
maximum.
1. Insert one end of the Co2 tube supplied in
the package into the
pressure regulator.
2. Insert the other end of
the tube into the Co2
inlet coupling of the
machine.
3. Take the regulator and gently screw the
connecting nut onto the
top of the cylinder.
4. Secure the pressure
regulator by tightening
the nut with a wrench.
5. Place the Co2 cylinder and the pressure
regulator in a safe place and in a vertical
position with the regulator upwards.
6.
Open the Co2 cylinder
and check for leaks
(hissing or recognizable
noises of leaks)
IMPORTANT!
-Be sure Co2 cylinder is well placed
-Be sure don’t staple the flexible hose into
the backdoor
2.
4.
6.
IMPORTANT!
-
Make sure that the pressure of the Co2 cylinder is 2
bar maximum.
Winefit SrL
www.winefit.com -
Headquarters: Località Drove, 2 / G - 1 'Internal floor 53036 - Poggibonsi - Siena - Italy
Plant and Offices: Via G. Mazzini 70 - 21020 Ternate - Varese - Italy
P VAT number 05989390488