Moving Your Beverage center
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. Also protect the outside of the
appliance with a blanket or similar item.
Energy saving Tip
The beverage center should be located in the coolest area of the room, away from heat producing appliances, and
away from direct sunlight.
TROUBLESHOOTING GUIDE
Many common issues with your beverage center can be solved very easily. Try the troubleshooting tips below
should you experience any problems.
PROBLEM
POSSIBLE CAUSE
Beverage center does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a fuse has blown out.
Beverage center is not cold enough.
Check the temperature control setting.
External environment may require a higher setting. (e.g. room
needs to be air conditioned)
The door is opened too often.
The door is not closed completely.
The door gasket is not sealing properly.
Beverage center is turning on and off frequently.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work.
Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light button is “OFF”.
Vibrations.
Check to assure that the beverage center is on a level
surface.
The beverage center seems to make too much noise.
A faint humming noise may come from the flow of the
refrigerator, which is normal.
As each cycle ends, you may hear gurgling sounds caused by
the flow of refrigerant in your beverage center.
7
