USER
MANUAL
WINE
IN50+
Page 16
3.2.
Plugging in the wine conditionning unit WINE IN50+
3.2.1.
Temperature setting of the air conditioner WINE IN50+
The setting of the targeted temperature is made on the thermostat :
-
Press button
one second until the targeted temperature is blinking.
-
Use button
to increase the temperature or
-
Use button
to lower the temperature.
-
When the right temperature is set, press again on button
to confirm it.
Explanation of the main display symbols :
Red light
= cold mode engaged (compressor working)
Red light
= cooling fan high speed
Red light
= defrost
Red light
= heat mode engaged (resistance)
3.3.
Stanby mode
- Stanby mode : maintain a 3 seconds pressure on button 1. The compressor
stops and the fan turn at low speed.
-
The thermostat indicates « OFF » and also the cellar temperature.
-
To come back, maintain again a 3 seconds pressure on button 1.
-
The thermostat indicates « ON » during 1 second.
3.4.
Automatic defrost
4.
The program of the IN50+ thermostat will run an automatic defrost time several times a day. During
this operation, the compressor is stopped, only the fan is functioning at low speed. The condensate
water producing during this period will be evacuated through the tube drain.
