background image

HOW TO USE THIS MANUAL 

WAV  86038510  05/15/07 

   1-1  

 

This manual contains the following sections: 
 

HOW TO USE THIS MANUAL 

SAFETY 

OPERATIONS 

MAINTENANCE

 

PARTS LIST

 

 

The HOW TO USE THIS MANUAL section will tell 
you how to find important information for ordering 
correct repair parts. 
 
Parts may be ordered from authorized Windsor 
dealers.

 

When placing an order for parts, the 

machine model and machine serial number are 
important. Refer to the MACHINE DATA box which 
is filled out during the installation of your machine. 
The MACHINE DATA box is located on the inside of 
the front cover of this manual.   
 
 
 
 
 
 
 
 
 
 
 
 
 
The model and serial number of your machine is on 
the bottom back-end of the machine.   

 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
The SAFETY section contains important information 
regarding hazard or unsafe practices of the 
machine. Levels of hazards is identified that could 
result in product or personal injury, or severe injury 
resulting in death. 
 
The OPERATIONS section is to familiarize the 
operator with the operation and function of the 
machine. 
 
The MAINTENANCE section contains preventive 
maintenance to keep the machine and its 
components  in good working condition. They are 
listed in this general order: 
 

Belt/Brush Motor  

Vac Motor and Filters 

Vac Motor Carbon Brushes 

Brush Motor 

Carbon Brush 

Daily Maintenance 

Regular/Periodic Maintenance 

 

The PARTS LIST section contains assembled parts 
illustrations and corresponding parts list. The parts 
lists include a number of columns of information: 
 

 

REF – 

column refers to the reference  

number on the parts illustration. 

PART NO.

 – column lists the part 

number for the part. 

PRV NO.

 – reference number. 

QTY

 – column lists the quantity  of the  

part used in that area of the machine. 

DESCRIPTION 

– column is a brief  

description of the part. 

SERIAL NO. FROM

 – column indicates 

the first machine the part number is 
applicable to. When the machine design 
has changed, this column will indicate 
serial number of applicable machine. 
The main illustration shows the most 
current design of the machine. The 
boxed illustrations show older designs. If 
column has an asterisk (*), call 
manufacturer for serial number. 

-

     NOTES 

– column for information not 

noted by the other columns. 

 

NOTE: If a service or option kit is installed on your 
machine, be sure to keep the KIT INSTRUCTIONS 
which came with the kit. It contains replacement 
parts numbers needed for ordering future parts.

  

MODEL  _____________________________________ 
 

 

 

 

            

DATE  OF  PURCHASE  ________________________  
 

 

 

 

 

SERIAL   NUMBER  ____________________________ 
                                              
SALES REPRESENTATIVE  #  ___________________ 
 

 

 

 

 

 

DEALER   NAME  ______________________________ 
 
OPERATIONS GUIDE NUMBER  __________________  
 
 
PUBLISHED

  ________________________________

  

  

 

   

 

 

 

Copyright 1995 Windsor Industries, Printed in USA

 

Summary of Contents for Wave WAV 10125050





























Reviews: