Windsor VOYDU 10086130, Operating Instructions Manual, Page: 21 / 136

21
Operations
To Begin Scrubbing
When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
1. Turn machine power on.
2. Position rotary switch to the position matching the
process to be preformed, and the chemical that
was added to the solution tank or chemical tank
(Deluxe), either interim or interim/pre-spray
(Deluxe) or extraction cleaning.
3. Check position of reverse button and the position
speed control knob so that the machine is set to
travel in the direction and the speed intended.
4. Drive machine forward to begin scrubbing.
To Stop Scrubbing
1. While scrubbing turn off the pump switch to stop
spraying solution. Continue to scrub and recover
the solution for an additional pass.
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
position so that the vacuum motor continues to run
and evacuate the system. This will also raise the
deck and vacuum shoes.
4. Turn the rotary switch to the off position by rotating
the selector switch clockwise. Turn machine power
off.
Deluxe
1. While scrubbing turn off the pump switch to stop
spraying solution. Continue to scrub and recover
the solution for an additional pass.
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
position so that the vacuum motor continues to run
and evacuate the system. This will also raise the
deck and vacuum shoes.
4. Turn the rotary switch to the off position by rotating
the selector switch clockwise. Turn machine power
off.
FOR SAFETY: Before leaving or servicing
machine: stop on level surface, turn off machine
and remove key.
FOR SAFETY: When using machine, go slow on
inclines and slippery services.
86292490 Voyager Duo