Windsor Saber Compact 16 SP, Service Manual

Page: 11 / 53

10
English
– The maximum battery dimensions must
be observed.
When charging low-maintenance batter-
ies, the manufacturer’s guidelines must
be observed (see maintenance sched-
ule)
The brushes must be installed before the ini-
tial operation (see "Maintenance works").
Î Insert the squeegee tool into the squee-
gee tool suspension in such a manner
that the profiled sheet is positioned
above the suspension. Tighten the wing
nuts.
Î
Insert the suction hose.
몇
Warning!
Risk of damage. Raise the squeegee before
reversing.
Note
To render the brush drive immediately inop-
erational, release the control handle.
몇
Warning
Risk of damage. Only use the recommended
detergents. With respect to different deter-
gents the operator bears the increased risk
regarding the operational safety and danger
of accident. Only use detergents that are
free from solvents, hydrochloric acid and hy-
drofluoric acid.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Î Open the cover of the fresh water reser-
voir.
Î
Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liquid
60°C / 140 °F.
Î Close the cover of the fresh water reser-
voir.
When the running gear is turned to the front
the appliance can be pushed to the place of
use without any contact of the brushes with
the floor.
Î Raise the squeegee tool.
Î Press the appliance to the bottom using
the push handle.
Î
Turn the running gear to the front with
your foot.
Î Use the push handle to push the appli-
ance to the place of use.
1 OFF Appliance is not operational.
2 Scrub cleaning Wet cleaning the floor
and vacuum up dirty water.
3 Wet scrubbing Wet cleaning the floor
and allow the detergent to react.
4 Vacuuming up the detergent solution.
5 Polishing the floor without the application
of liquid.
Installing the Brushes
Installing the Squeegee Tool
Operation
Filling in Detergents
Driving to the Place of Use
Cleaning Programs
1
2
3
4
5