GROUNDING INSTRUCTIONS
NOTE: In Canada, the use of a temporary adaptor is not
permitted by the Canadian Electrical Code
PROPER GROUNDING (115V)
Metal Screw
Adaptor
Grounded Outlet Box
Fig. A
Fig. B
Fig. C
Tab For Grounding Screw
Grounded
Outlet
Grounding Pin
Adaptor
THIS PRODUCT IS FOR COMMERCIAL USE ONLY.
ELECTRICAL:
The amp, hertz, and voltage are listed on the data
label found on each machine. Using voltages above
or below those indicated on the data label will cause
serious damage to the motors.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should
malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with
a cord having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
Non-Compatible
Aldehydes
Aromatics Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated
Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
CHEMICALS
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
The D250 is for use on a nominal 115-volt circuit, and
has a grounded plug that looks like the plug in “Fig. A”.
A temporary adaptor that looks like the adaptor in “Fig
. C” may be used to connect this plug to a 2-pole
receptacle as shown in “Fig. B”, if a properly grounded
outlet is not available. The temporary adaptor should
be used only until a properly grounded outlet (Fig. A)
can be installed by a qualified electrician. The green
colored rigid ear, lug, or the like extending from the
adaptor must be connected to a permanent ground
such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place
by a metal screw.
The D250IE is for use on a nominal 230-volt circuit.
Warning:
Using the incompatible chemicals listed above will
damage the machine. Damages of this type are
not covered under the 6-3-1 warranty. Carefully
read ingredients on manufacturer's label before
using any product in this machine.
Improper connection of the
equipment-grounding
conductor can result in a risk
of electric shock. Check with a qualified electrician or
service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug
provided with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
D-250 86038570 05/11/07
3
Summary of Contents for D250 (115V)
Page 13: ...NOTES D 250 86038570 05 11 07 12 ...
Page 18: ...VACUUM GROUP LOWER D 250 86038570 05 11 07 17 4 6 5 7 3 2 10 11 1 8 9 12 ...
Page 20: ...PUMP HEATER GROUP 200 PSI D 250 86038570 05 11 07 19 1 2 5 7 6 8 9 10 11 16 15 12 13 14 3 4 ...
Page 25: ...115V WIRING DIAGRAM D 250 86038570 05 11 07 24 ...