18
Operations
9.
Store and secure hoses and tools neatly.
10. Drain machine at proper disposal areas. Use
pressure gun to rinse and clean recovery tank.
11. From the factory your Compass 2 is set to spray at
600 psi (high pressure) and 200 psi (low pressure
w/chemical injection). To lower pressure turn the
unloader valve knob counter clockwise. The valve
is accessed from below the machine through a
hole in the bottom frame. Only turn the valve a
maximum of three revolutions.
NOTE: Lowering the pressure in this way will reduce
both of the high pressure and low pressure setting
simultaneously.
86398820 Operator Manual CMPS2
