CONTROLS/COMPONENT LOCATIONS
1.
Main Handle.
Used to pull and maneuver
machine.
2. Electrical
Cord.
3. Pump
Switch.
Turns on pump and enables
spray.
3
5
4. Brush/Spray
switch.
Turns on brush motor
and activates electro-valve to dispense solution
to floor through jets. Intermittent, off, and
continuous settings.
5. Vacuum Motor Switch.
Turns on vacuum
motor
6. Brush Motor Circuit Breaker.
6 amp. Breaker
protecting brush motor.
4
1
7. Vacuum Motor Circuit Breaker.
15 amp.
Breaker protecting vacuum motor.
8. Recovery Dump Hose.
Facilitates draining
dirty cleaning solution.
7
9. Solution Dump Hose.
Facilitates draining
excess cleaning solution from solution tank.
2
6
8
9
CADET 86038220 03/16/07
3-2
