5
2.2 Displaying wind speed
When the display shows the temperature, briefly press the
key once and the display will then change to
wind speed.
Briefly press the
key again or wait approx. 60 seconds and the display will return to the temperature
display screen.
Wind speed can be displayed in both AUTOMATIC and MANUAL settings.
Note: The wind speed will not be displayed correctly for approx. 90 seconds after power has returned to the
weather station (e.g. after a loss of power or at start up). If the wind alarm is activated, manual operation is
blocked during this time.
2.3 Manual operation
The connected windows can be operated manually using the control panel keys.
AUTOMATIC operation is “switched off” and operation is no longer based on the indoor temperature.
The rain and wind alarms remain active if they are set to active in AUTOMATIC mode.
If the window is operated by using the
(arrow keys), the system will revert back to AUTOMATIC operation
after 30 minutes.
If the
key has been pressed for operating in
(MANUAL operation), operation will remain in MANUAL
until the system has been returned to AUTOMATIC control by pressing the
key.
Open stop close
The connected window can be operated manually using the
,
and
(open, stop, close) keys.
With a short press of the
key (shorter than 1 second), the window opens completely.
With a long press of the
key (longer than 1 second) the window opens as long as the
key is pressed.
With a short press of the
key, the window closes completely.
With a long press of the
key, the window closes as long as the
key is pressed.
Pressing
stops the window motor.
Manual/automatic
key switches between the AUTOMATIC
and MANUAL
operating modes. After manual operation
using the
, or keys, the control system will be in MANUAL operating mode. Thus, AUTOMATIC
operation is deactivated and control is no longer based on the temperature. Pressing the
key returns the
system to AUTOMATIC operating mode.
Summary of Contents for NV Solo
Page 30: ...30 10 6 2 WCC 3x0 Standard...
