16
After the settings in the basic settings have been set and saved, the values for AUTOMATIC operation can be
adjusted. Test the sensor function the first time this function is used, (point 7.6).
4.4.B LEA
SP
is selected
After confirmation of
SP;
1.
The display shows the run time “5 sec.” and the clock blinks.
2.
Set the time using
.
3.
Confirm the selection by pressing the
key. The display will automatically change to setup for the next
parameter
– control-interval time
1.
The display shows the control-interval time 7 min. and the clock blinks.
2.
Set the time using
3.
Confirm the selection by pressing the
key. The display will automatically change to setup for the next
parameter
– save (
)
1.
The display shows SAV (save).
2.
Press the
key to save the entries. The display will change to display the indoor and outdoor
temperatures.
3.
The system is operating in manual setting. Change if necessary to AUTOMATIC operation
Summary of Contents for NV Solo
Page 30: ...30 10 6 2 WCC 3x0 Standard...
