3
English
Important information
•
Only genuine 24 VDC WindowMaster actuators with MotorLink
®
can be connected, see product sheet.
•
The WIC 01M must not be covered (maximum casing temperature 50°C).
•
WIC 01M is a class 2 product.
•
For indoor use only.
•
Before commencing any maintenance/service disconnect from mains supply.
•
The package can be disposed together with ordinary household waste.
•
It is recommended that the WIC 01M is not placed in dusty surroundings.
•
It is recommended to place a remote control in the room where the window and controller is placed.
•
Only connect io-homecontrol
®
compatible products to the sun screen terminals.
•
RF-band: 868MHz.
•
RF reach: 300m in free field. Indoor the reach is limited to approximately 30m.
Description
WIC 01M is a control-unit that is used for controlling 24 VDC window openers with MotorLink
®
and various io-
homecontrol
®
sun screen products, with a total simultaneous current consumption of max 1A. WIC 01M has one set of
terminals for the connection of actuator cable (0V, 24V and communication) and two powerlink terminals for the
connection of various types of io-homecontrol
®
sun screening products from VELUX or VELFAC. In addition, it is
possible to connect a rain sensor.
The WIC 01M carries the io-homecontrol
®
label. That means that it is compatible with other io-homecontrol
®
products.
It is recommended to use the remote control KLR 200 from VELUX to control the WIC 01M.
The preliminary setup of the WIC 01M is described in this manual, for configuration with the KLR 200, please see refer to
its instruction manual.
Sunscreening
product
WIC 01M
Window motor
230V
– 50Hz
Rain sensor
