SPECIFICATION
PARTS NAME
Power line
Air entry
Crystal Glass Plate
Control panel
Air vent
Model
Cooking
Zones
Supply
Voltage
Rating Power
Product Size
L×W×H(mm)
A×B
Building-in
Dimension
(mm)
YL-CF6002
4 Zones 220-240V~
6500W (Rear left
induction:
1200W; Front left
induction:
1800W; Rear right
infrared:
1800W; front right
infrared: 1200W)
590 X 520 X 64
560*490
FUNCTION DIAGRAM
-4-
Using your Ceramic and Induction Hob
To start cooking
•
After power on, the buzzer beeps once, all theindicators light up for 1 second then
go out, indicating that the cooker has enteredthe state of standby mode.
1.Touch the ON/OFFcontrol ,the power indicators show“-“
2.Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of
the cooking
zone are clean and dry.
3.Touching the heating zone selection control, an indicator next to
the key will flash.
4. Select a heat setting by touching the or control .
If you don’t choose a heat setting within 30 seconds, the cooker
will automatically switchoff. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
1.Turn the whole cooktop off by touching the ON/OFF control.
2.Beware of hot surfaces“ H”will show which cooking zone is hot
to touch. It will disappear when the surface has cooled down to a
safe temperature. It can also beused as an energy saving function
if you want to heat further pans, use the hotplate that is still hot.
Locking the Controls
When you have finished cooking
•
Yo u c a n l o c k t h e c o n t r o l s t o p r e v e n t u n i n t e n d e d u s e ( f o r e x a m p l e c h i l d r e n
a c c i d e n t a l l y turning the cooking zones on).
• W h e n t h e c o n t r o l s a r e l o c k e d , a l l t h e c o n t r o l s e x c e p t t h e O N / O F F c o n t r o l
a r e disabled.
-9-
