Failure Display and Inspection for induction cooking zone
If an abnormality comes up, the induction cooker will enter the protective state
automatically and display corresponding protective codes:
Problem
Possible causes
What to do
E0
Circuitfailure
Please contact the supplier
E2/E8
Temperature sensor ofthe IGBT
failure.
Please contact the supplier.
E3/E4
Abnormal supply voltage
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E5/E6/E7
High temperature of the induction
coil temperature sensor
Please contact the supplier.
E9
High temperature of the IGBT
temperature sensor
Please restart after the
cooker cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to
the induction cooker.
1. The induction hotplate must be installed by qualified personnel or technicians. We
have professionals at your service. Please never conduct the operation by yourself.
2. The cooker will not be installed directly above adishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the cooker
electronics
3. The induction hotplate shall be installed such that better heat radiation can be
ensured to enhance itsreliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
Cautions
-13-
