30
2.
For the installer
Fig. 62 Door hinge only screwed in loosely to
start with
Fig. 63 Hooking the bottom of the cladding
door into the door hinge
2.3.20 Installing the cladding door
Note!
The cladding door and the boiler doors are designed for door catches on either the left or right. Standard
delivery always includes a door catch on the left. The catches on the cladding door and boiler doors must
be on the same side.
– The lower door hinge should only be screwed in loosely – Fig. 62.
– Hook the cladding door in at the lower door hinge (Fig. 63) and hook the top of the door into the door hinge (Fig. 64).
Then fasten the upper door hinge on the inside of the operating panel with 2 TT screws (with the cladding door
hooked in) – Fig. 65.
– Tighten the screws for the lower door hinge.
Fig. 64 Hooking the door into the upper hinge
Fig. 65 Securing the door hinge with 2
self-threading TT screws
2 x
Fig. 66 Door installed
