6.1 Maintenance precautions:
-Make sure that the charger and charging line of the electric scooter are disconnected, and that the electric
scooter is turned off.
-Wipe the shell with a soft cloth to clean the electric scooter. Do not add too much lubricating oil to bearing
maintenance.
-It is forbidden to use a high-pressure water gun or soak in liquid to clean the electric scooter, which will cause
permanent damage to the internal electronic components of the host.
-In order to protect the safety of users, users are not allowed to disassemble the electric scooter privately, other-
wise it will be regarded that the user automatically give up the maintenance and warranty rights of the product.
Warning
-Fully charged, 60kg load, 25 ° C. It is measured on the flat and hardened road, no wind environment, driving in
cruise mode at a speed of 15km / h. The driving mileage will vary according to different load, wind speed, road
conditions and operator habits.
Endurance instructions
-Before storage, please fully charge your scooter to prevent over-discharge of the battery caused by prolonged use.
Please make sure to charge and discharge it at least once a month.
-Do not charge the scooter if the storage temperature is below 0°C. It can be placed in an indoor environment
(above 10°C) for recharging and stored at -10°C-35°C.
-Please store the electric scooter indoors in a dry place with proper temperature. You can shield the electric
scooter to prevent dust accumulation from affecting performance.
Storage
6 Daily maintenance
15
Summary of Contents for FST10
Page 1: ...ENGLISH MANUAL Scan me...
