FOR YOUR SAFETY
IMPORTANT INSTRUCTIONS
Read and save these important safety instructions before using this unit. When
using electrical appliances, basic safety precautions should always be followed
including the following:
1) Use this unit only as described in this manual. Other uses not recommended
may cause fire or electric shock.
2) This product is intended for household use ONLY and not for commercial,
industrial or outside use.
3) To protect against electrical shock, do not place unit in window, immerse unit,
plug or cord in water, or spray with liquids.
4) Close supervision is necessary when any appliance is used near children.
5) Unplug the unit from the outlet when not in use, when moving from one
location to another, and before cleaning.
6) Do not operate the unit in the presence of explosive and/or flammable fumes.
7) Do not place the unit or any parts near an open flame, cooking or other
heating appliance.
8) Do not operate the unit with a damaged cord, plug, after a malfunction, or
if dropped or damaged in any manner.
9) Avoid contact with moving parts.
10) To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
11) The use of attachments is not recommended and may cause hazards.
12) Always use on a dry level surface.
13) Do not operate if the unit housing is removed or damaged.
15) WARNING: Do not use this unit with any AC/DC adapter that is not
approved by Windchaser. This may damage the unit or cause a hazard.
16) FOR INDOOR USE ONLY
SAVE THESE INSTRUCTIONS
1. Turn the control to “OFF” and unplug the unit before cleaning.
2. Use only a soft, damp cloth (not dripping wet) to clean the exterior.
A vacuum or can of compressed air can be used to clean the interior.
DO NOT OPEN THE HEATER HOUSING. Spray air through the back
and front grills with the can of compressed air to loosen dust, then vaccum
inside and around the unit.
NOTE: Can of compressed air can be purchased at a local computer store or
any store that sells computer accessories.
3. Do not immerse the unit in water and never allow water to drip into
the housing.
4. Do not use gasoline, paint thinner or other chemicals to clean the unit.
5. Store the unit in it’s original box in a cool, dry place.
NOTE: If a problem is experienced, please return the unit to the place
of the original purchase or see the warranty. To avoid electric shock,
do not open the unit housing. There are no user-serviceable parts inside.
Any repair work must be done by a qualified technician appointed by
WindChaser Products. Opening the unit housing will void the
warranty and may cause damage to the unit or personal injury.
CLEANING AND STORAGE
1. Always turn the unit to the “OFF” position when not in use.
2. Avoid using the AC/DC power adapter in wet or damp places.
Position it in areas where the air ventilation is good.
3. Keep the front inlet and the top outlet grills free from air blocking
materials such as clothing, plastic bags or papers.
4. If the unit has been properly connected and no power is flowing,
contact WindChaser Products Customer Service (see warranty).
5. Always keep the unit at an upright position to avoid water leakage.
6. The thumb should be placed at the top center of the unit while lifting
by the carry handle (7), to avoid tilting. At the same time, the other
hand should hold the base to secure the unit.
MAINTENANCE
