Wind Crest UIX3622S, Use, Care And Installation Manual

Page: 17 / 22

15
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
OXVWHUDQGJUDLQ$OZD\VVFUXEOLJKWO\XVLQJDPLFUR¿EHURUFOHDQFRWWRQFORWKDQGZLWKWKHJUDLQ
&OHDQLQJWKH%DIÀH)LOWHUV
7KH¿OWHUVDUHLQWHQGHGWRWUDSUHVLGXHDQGJUHDVHIURPFRRNLQJ$OWKRXJKWKH¿OWHUVVKRXOGQHYHUQHHG
replacing, they are required to be cleaned every 30 hours of use or more often depending on cooking habits.
)LOWHUVPD\EHSODFHGLQGLVKZDVKHUDWORZKHDWRUVRDNHGLQKRWVRDS\ZDWHU'U\¿OWHUVDQGUHLQVWDOOEHIRUH
using hood.
,QVWDOOLQJWKH%DIÀH),OWHUV),*
3ODFH¿OWHULQWRWRSJURRYHRIWKHLQVHUWDVVKRZQDQG
pull towards front of insert using handles.
3LYRWEDFNRI¿OWHUXSZDUGVVRLWLVDQJOHGLQWKHLQVHUW
3XVK¿OWHULQWRFKDQQHORQEDFNRILQVHUWWRORFNLQWRSODFH
5HSODFLQJWKH%DIÀH)LOWHUV
Hood Model: Part No. Qty. to Order
8,;68,;6 6ODUJH
8,;6 6VPDOO
8,;6 6VPDOO
Cleaning the Grease Tray
7KHJUHDVHWUD\LVLQWHQGHGWRFDWFKUHVLGXHDQGJUHDVHWKDWPD\GULSIURPWKHEDIÀH¿OWHUV7KHJUHDVHWUD\
VKRXOGEHFOHDQHGZKHQEDIÀH¿OWHUVDUHFOHDQHG&OHDQWKHJUHDVHWUD\E\VRDNLQJLQKRWVRDS\ZDWHUDQG
gently scrubing any residue off with a soft terry cloth. Dry grease tray and re-install before using hood.
Removing the Grease Tray
Grease tray has a hooked lip that attaches to bottom panel top edge.
Remove grease tray by:
1. Pull up on tray to release from bottom panel. FIG. 6-1
2. Pull tray out of insert body. FIG. 6-2
1
2
Maintenance –
Cleaning & Installing Filters
1 1
2
FIG. 5
FIG. 6