14
www.windcrestcnp.com
© Wind Crest CNP Industries, Inc.
Maintenance –
Cleaning and Installing Filters
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.
Decorative Mesh and Baffl e Filters
The filters are intended to trap residue and grease from cooking. Although the fi lters should never need
replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry fi lters and re-install before
using hood.
Removing Decorative Mesh Filters (UIX2916S), FIG 4:
1. Pull down on fi lter handle.
2. Remove fi lter by pulling it out from the power pack.
Removing Baffle Filters (UIX3816S), FIG 5:
1. Pull filter towards front of power pack using handles.
2. Pivot back of fi lter downward.
3. Remove fi lter by pushing it away from the power pack.
1
2
3
2
1
FIG 4
FIG 5
Summary of Contents for UIX2916S
Page 2: ...www windcrestcnp com ...
