TH200E User Guide
11
Configuring The Printer
The printer has already been pre-configured. However, you can re-configure the
printer using the FEED BUTTON MENU. The MENU can also display current
configuration settings and perform self-tests.
To access the menu, switch off the printer. Press the FEED button down for at least
2 seconds while turning on the power switch. The menu page will be printed:
Print Self Test
–
Show important configuration settings for the printer and do a
simple printing test
Configuration
–
Change parameter settings for the printer. (see next page for
details)
Cutter Test
–
The printer performs 4 halfcuts and a fullcut
Sensor Test
–
ERR LED will indicate ON/OFF according to the state of the
sensors
Print Statistics
–
Show the total number of paper cuts and linefeeds performed
To choose a submenu,
PRESS THE FEED BUTTON X-TIMES
according to the
selection digit in the main menu, then press and hold the FEED button for at least
one second to validate the choice.
