BEETLE /M-III User Manual
3
Before you begin an installation on the device, you should static
discharge, for example, by touching a grounded object (such as
heating).
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
Never plug in or unplug data communication lines during thunder-
storms.
Protect the device from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
The ventilation slots of the power supply must remain unobstructed to
ensure sufficient ventilation of the equipment. If the equipment is to
be fitted, you must ensure that the specified minimum distances are
maintained and constant ventilation is provided.
In emergencies (e.g. damaged housing or damaged power cable, pene-
tration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service
of Wincor Nixdorf or your dealer must be notified.
The lithium battery must be disposed of in accordance with local regu-
lations for special waste. In case of an improper change of the lithium
battery it exist an explosion risk.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs
may not only seriously jeopardize the safety of the user, but also
cancel all warranty and liability agreements.
Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guar-
antee a fault less and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3. Thus you can help
to avoid possible malfunctions.
