Wincor Nixdorf BEETLE /i8A-3, User Manual

Page: 24 / 48

The system is automatically switched off, when the operating system is shut
down. Pushing (approx. 5 seconds) the ON button at any time will shut
down the system. The proper function of the On button is defined by the
settings of the operating system and the BIOS.The power cord receptacle
and the power socket for the printer are located on the back of the BEETLE
system.
The po wer pack must be re mo ved or re pla ced by aut ho ri zed qua li -
fied per son nel only. Only re pla ce po wer packs re lea sed by Wincor
Nix dorf.
To dis con nect the de vi ce from the supp ly vol ta ge com ple te ly,
switch off the de vi ce and dis con nect the power plug.
Po wer Con nec tor
This connector provides the power. Connect the according end of the power
cable to this port and the other end to the power socket.
Pull the mains plug to power-off the device.
DC24V (Mo du lar Prin ter)
Appropriate POS printers can be connected via the low-voltage jack 24V,
max. 3A via non-UPS. A connecting cable with a HOSIDEN plug is required
for this.
Con nect only ca bles to the 24V con nec tor which are mar ked with
DP-1 or DP-2.
Do not con nect the HO SI DEN plug when the sys tem is tur ned on,
this can lead to an au to ma ti cal re boot of the sys tem.
RJ12 (CASHDR)
The power supply unit has one RJ12 socket for connecting a cash drawer.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. RJ12 plugs lock in when you insert them. Power is supplied
to the cash drawer via this socket, P24V +5% / -15%.
24 BEETLE /i8A-3