For changing the adjustment position please proceed as follows:
■
Loosen the appropriate adjusting screw with a coin or a screw-
driver (1).
■
Move the screw in the position as requested (2).
■
Tighten the adjusting screw (3).
There may be some difference between the measured distance A and the
actual sensing position.
Inserting a validation
Inserting a validation
Ensure that the valida-
tion is smooth. Insert
the bottom, right-hand
end of the paper in the
right guide limit. The
side on which the vali-
dation is to be printed
must face the cashier.
Hold the paper straight
and slide it into the gui-
de as far as the bot-
tom stop.
The yellow LED is on when you can insert a validation and it starts blin-
king when the validation printing is done.
In order to ensure that the paper is printed properly, avoid
pressing the papier downwards or pulling it upwards while
it is being printed.
Rechnungsbetrag:
POS
Systeme
Two-stations printer
Inserting a validation
GB - 49
