Moun ting on the left Side
Proceed as described above ("Mounting on the right side"). Disconnect the
cable to connect it to the USB interface at the rearside of the monitor.
Push the bracket of the Reader into the opening of the housing, so that the
holes are lying upon each other. Then tighten it.
Pass the cable into the
cable guidance of the
Swipe Card Reader and
connect it.
Push the reader beneath
the bracket, so that the
screws fit into the keyhole
and the holder lays under
the clamps.
Tighten the screws.
Pass the cable through
the cable guidance and
connect it to the USB
interface. If a HUB is
available you should use
one of it's USB interfaces.
Do not release the cable
loop (see page 37).
Attach the cover of the
swipe card reader and
push it to the monitor until
it engages (see page 38).
Flap the loudspeaker's
bezel upwards and snap it
into place.
Mount the monitor's
stand.
39
MOUN TING ON THE LEFT SIDE
Clamp
Clamp
Summary of Contents for BA82 /cTouch
Page 1: ...BA82 LCD TFT 12 1 30 7 cm Flat Panel Display User Guide ...
Page 3: ...BA82 Flat Panel Display User Guide Edition August 2010 ...
Page 57: ...Exit sub menu EXIT OSD 50 EXIT OSD BA 82 E x i t O S D 8 0 0 x 6 0 0 6 0 H z ...
Page 59: ...Dimensions mm 52 DIMENSIONS MM 312 280 304 253 268 304 206 87 5 253 225 65 ...
