manualshive.com logo in svg

Wincor Nixdorf BA82 /cTouch, User Manual

Share
Download
Wincor Nixdorf BA82 /cTouch User Manual Download Page 11

USB  Inter fa ce

A ‘Plug and Play’ interface (Type A) for connecting peripherals during
operation, e.g. USB sticks or a keyboard.

On Screen Dis play (OSD)

Menu

Via the menu you can set the loudness, brightness, contrast and colour.

Scrol ling

The arrows serve for scrolling forwards or backwards in the menu items.

LED

Dark

Power off

Green

Power on

Orange

Power save mode
the LED flashs in the standby mode

Red

Out of Range (improper display setting)

On/Off But ton

With this button you can switch the display on or off.

The optional devices supported by the USB HUB are electric powered. Only
the data transfer is separated. 

When the BA82 is connected to a BEETLE- system, the button also
switches the system on or off, provided that the system supports the
feature.

With this key you can switch the system into ‘Wake up Mode’ or ‘Sleep
Mode’ provided a Remote function (see page 18) for the BA82 is availabe
(i.e. the cable is connected to a BEETLE system via a remote connector).

4

FLAT PANEL DISPLAY BA82

Summary of Contents for BA82 /cTouch









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands