Safety Instructions
This device conforms to the corresponding safety regulations for informati-
on technology devices, including electronic office machines for use in the
office environment.
r
If the device is moved from a cold environment to a warmer room
where it is to be operated, condensation could occur. The device
must be completely dry before being put into operation. Therefore an
acclimatization time of at least two hours should be accounted for.
r
Lay all cables and supply lines so that nobody can tread on them or
trip over them.
r
Data cables should neither be connected nor removed during electri-
cal storms.
r
Protect the device from vibrations, dust, moisture and heat, and only
transport the device in its original packaging (to protect it against im-
pact and blows).
r
Take care to ensure that no foreign objects (e.g. paper clips) or
liquids can get into the inside of the device, as this could cause
electrical shocks or short circuits.
r
In case of emergencies (e.g. damaged housing, liquid or foreign ob-
jects getting into the device), the device should be switched off imme-
diately, the mains plug of the BEETLE or PC should be removed, and
the Wincor Nixdorf customer service should be contacted.
r
If the LCD display element is broken and the liquid crystal solution
leaks out of the display and onto your hands, clothing etc, wash your
hands or clothing immediately with soap or alcohol, holding them
under running water for at least 15 minutes.
If the liquid comes into contact with your eyes, please consult a doctor
immediately.
r
Generally you should connect IT-devices only to power supply sy-
stems with separately guided protective earth conductor (PE), known
as TN-S networks. Do not use PEN conductors! Please also obser-
ve the recommendations of the norm DIN VDE 0100, part 540, Appen-
dix C2, as well as EN50174-2, §5.4.3.
Safety Instructions
Manufacturer’s Certificate and Notes
GB - 56
