Releasing the Cable Connection
Releasing the Cable Connection / Software Installation
Never remove a cable from a connector socket by simply pulling on the
cable. Always remove the cable by the connector housing. Please follow
the instructions below when removing cables:
r
Turn off all switches to the mains and electrical equipment.
r
Remove all mains cables from the shockproof sockets installed in the
building.
r
Remove all data transfer cables from the data network connector
devices.
r
Loosen all cables on the electrical equipment.
To release the cable, press the
metal latches of the MDR (Mini Delta
Ribbon) connector together and
then remove the connector from the
socket.
Software Installation
The BA70 is Standard-VGA-compatible (640 x 480 pixels, 16 grey tones).
Therefore, no special drivers are needed for operating systems MS-DOS,
Windows 95 / 98 and Windows NT.
Releasing the Cable Connection / Software Installation
GB - 15
