Wincomm WPC-651, User Manual

Page: 30 / 66

3-10
Self-Monitoring, analysis and reporting Technology. For prediction of
device degradation and/or faults.
Boot Up Num-Lock
Select “On” to enable numeric function of the numeric keypad, or “Off” to
disregard it.
PS/2 Mouse Support
Select “Enabled” to enable PS/2 mouse function, or “Disabled” to release
IRQ12 interrupt for other ISA-bus I/O devices.
System Keyboard
This option will be used to neglect “keyboard error” while you choose
Absent setting in your BIOS setup and system has no keyboard attached.
Primary Display
Chooses Absent, VGA/EGA, CGA40x25, CGA80x25, or Mono to meet
your monitor type. If you select Absent, the “CMOS Display Type Wrong”
message will be ignored regardless the mismatched display card.
Password Check
This option enables the password checking when the system boots up or runs
CMOS Setup. It only takes effect after setting Change Supervisor Password.
Setup : This option will force system to check password before running
Setup if you have already entered the current user password in “Change User
Password”. By that time, the system will be only able to boot but deny
accessing Setup.