manualshive.com logo in svg

Winco Inverness 24-Hour Treatment Recliner, Owner'S Operating And Maintenance Manual

Share
Download
Winco Inverness 24-Hour Treatment Recliner Owner'S Operating And Maintenance Manual Download Page 11

1. 

Loosen pivot table knob.

2. 

Remove pivot table by pulling straight up on pivot table.

3. 

Find pivot table opening located in the upper front portion of the armrest cover.

4. 

Place pivot table opening over pivot table bracket and fit armrest cover over the front portion of the 
arm.

5. 

Fit the rear portion of the armrest cover over the rear of the arm. 

6. 

Gently insert pivot table into bracket.

7. 

Tighten knob.

Page 11 of 32

Document No.: 006335 
Revision: K 

OWNERS OPERATING & MAINTENANCE MANUAL

INVERNESS 24-HOUR TREATMENT RECLINER™

CHAIRS WITH PIVOT TABLES

ARMREST COVER INSTALLATION - CONTINUED

1

2

3

4

6

7

NOTE

:  

Cover designs vary based on chair options (i.e. tables, heat/massage, etc.)

Covers are left-hand and right-hand specific.  

Make sure you are installing each cover on the correct side.

5

Be careful when using swing-arms with a pivot table.  Make 
sure the pivot table is secure and tight so that it does not swing 
uncontrolled or make unwanted contact with objects and/or people.

Summary of Contents for Inverness 24-Hour Treatment Recliner

































Reviews:

No comments

Brands by name

Popular brands

Load more brands