BACK ASSEMBLY INSTRUCTIONS
1. Remove back assembly and chair frame from carton.
NOTE:
Make sure the footrest is in closed position before installing the back.
KEEP FINGERS AND HANDS CLEAR OF MOVING PARTS AND PINCH POINTS.
2. Locate the package of hardware containing three (3) SLIC Pins for attaching the back frame to the seat frame
in the carton marked "Hardware Enclosed"
.
3. Position the back frame forks over the seat frame rails
.
4. Align the operator bracket hole with the seat frame bracket and insert SLIC pin through all holes in operator
and brackets
(FIG. 1 & 1B).
5. Finally, line up the back frame fork holes with the holes in the seat frame and insert a SLIC pin from the inside
of the chair pushing outward
(FIG. 2)
. Repeat for the other side. COMPLETE
(FIG. 2B).
•
HELPFUL HINT:
Align the holes on the lower back frame while allowing the upholstered back to rest
on the seat. This will help you steady the chair back. If possible, have someone help you hold the back
assembly while you install SLIC pins.
FIG. 1
FIG. 1B
FIG. 2B
FIG. 2
Page 7 of 16
Document No.: 006122
Revision: A
OWNERS OPERATING & MAINTENANCE MANUAL
HOME CARE CLINER
Copyright © 2021 Winco Mfg., LLC