GENERAL MAINTENANCE
ADJUSTING THE RECLINER MECHANISMS
1. Place chair on its side in the #2 (Recline) position. Each chair has a left and right recline mechanism with two
tension adjustments on each side, four total. Tension adjustment
A
controls the footrest and legrest action.
Tension adjustment
B
controls the recline action from the #2 to #3 position
(Fig. 4).
2. Locate the
two (2)
hex nuts
(A or B)
on the left and right recline mechanisms. Use a 7/16" wrench and adjust
both left and right hex nuts one full revolution. Turn right to tighten or left to loosen
(Fig. 5).
3. Return recliner to upright position and check recliner for reclining, legrest, and/or footrest action. Repeat step
two if needed. Tighten hex nuts no more than two full revolutions.
If your chair is not operating properly, remove the chair from service and call Winco Mfg., LLC.
Fig. 5
Fig. 4
Page 10 of 16
Document No.: 006122
Revision: A
OWNERS OPERATING & MAINTENANCE MANUAL
HOME CARE CLINER
Copyright © 2021 Winco Mfg., LLC