6
TM
Operation
Caution
Before using this equipment it must be cleaned and dried thoroughly. Clean all surfaces before use. Failure to
clean surfaces before using the unit could cause food contamination.
• Wash, rinse, sanitize and dry container prior to initial use, and whenever it will not be used again within a period of 1 hour. Follow
manufacturer's instructions for detergent and sanitizer concentration.
• Half fill the container with warm water and a non-sudsing detergent.
• Attach the lid and lid plug.
• Turn the machine ON and gradually increase the speed to MAX and run for 60 seconds.
• Turn off, remove container and rinse with clear warm water.
• Fill container with sanitizing solution, cover and run for 60 seconds.
• Remove the lid and lid plug, and wash along with the tamper in warm soapy water. Rinse and dry with a soft cloth.
• The power base can be wiped off with a damp cloth.
• Do not immerse the base of unit completely in water or use a dishwasher to clean.
Warning: do not allow excess liquid to drip into ventilation openings as this may affect the electrical and
mechanical systems.
NOTE:
Proper cleaning instructions must be followed; otherwise, operation of the unit may be seriously impaired. Do not
wash parts in an automatic dishwasher.
WINCO® authorized service personnel must perform any other servicing.
Cleaning & Sanitizing
1. Make sure power is off and speed dial is turned to low.
2. Plug in power cord attached to the base into an electrical outlet.
3. Secure the container on top of base.
4. Add ingredients as desired.
5. Place lid on container.
6. Turn on and increase speed or pulse ingredients to desired consistency.
7. If ingredients stick to the walls or do not fall near the blades, remove the clear plug in center of lid and use tamper to move items
down toward the blades.
8. When blending is complete, turn off and allow blades to come to a complete stop before removing container.
DO NOT use the tamper without the container lid securely on. The lid will keep the tamper from touching the blades. If lid is completely
removed, the tamper could make contact with the blades, causing contamination of ingredients, damage to the blades/motor and
possible injury.
The blender has a safety which will prevent it from spinning unless the container is properly secured to the base. Removing the
container will automatically stop the unit. However, doing this is not recommended due to possible damage to the gears between the
base and container.