Heat & Massage Operating Instructions
Refer to warnings on page 5.
HEAT & MASSAGE OPTIONS
Control panel is located inside the right arm of the chair.
Heating:
Gently touch the
HEAT
button to step through each temperature setting (see indicator light on
switch).
3 Lights
= High Heat
2 Lights
= Medium Heat
1 Light
= Low Heat
No Light
= HEAT OFF
Allow 5-8 minutes for back and seat to warm to desired
TEMPERATURE
setting.
Heat will automatically shut off after approximately 60 minutes (timer resets when switch is pressed).
Massage (Optional):
Gently touch the
MASSAGE
button to step through each massage setting.
1X
= Lower Back / Low Intensity
2X
= Lower Back / High Intensity
3X
= Upper & Lower Back / Low Intensity
4X
= Upper & Lower Back / High Intensity
5X
= Alternating Upper & Lower Back
6X
= MASSAGE OFF
Massage will automatically shut off after approximately 15 minutes (timer resets when switch is pressed).
Care & Trouble-Shooting Tips
•
Use a
DAMP CLOTH ONLY
to clean switch, wiring or power pack (located under seat frame).
•
If there is no heat or massage or flashing light on switch, check power cord connections to wall outlet
AND
power pack unit under chair.
•
If switch displays a flashing light, check all accessible wire connectors under chair for possible loose
connections, then contact Winco customer service: 1-800-237-3377.
Cord Storage
(Models with Heat or Massage only)
Before transporting chair or when heat & massage is not in use, power cord
should be coiled and stored in the hook and loop fastener provided as shown,
to prevent tripping on cord, damage to cord, damage to recliner, etc.
(Fig. 1).
fig. 1
Page 19 of 24
Document No.: 006120
Revision: AC
Owners Operating & Maintenance Manual:
Care Cliner Collection
Owners Operating & Maintenance Manual:
Care Cliner Collection
