WECA W6810DK
2727 N First Street, San Jose CA 95134
11
J11: 2x20 pin Header:
This 40-pin header provides access to W6810 analog and digital signals for a user
defined system, or a second W6810DK evaluation system for back-to-back operation.
J12A: SPKR- = R0- (SW4-4)
J12A connects RO- (Pin2) to the RJ11 and the RX output connector.
J12B: SPKR-=PA0+ (SW4-5)
J12B connects PA0+ (Pin 5) to the RJ11 and the RX output connector.
J13: PCMT: (SW4-6)
J13 Connects the PCMT (PCM output W6810) to J11 (Pin 9).
J14: BCLKT=BCLK (SW5-1)
J14 connects BCLK to BCLKT (Pin 12) of the W6810 Codec-Filter.
J15A: MCLK = 256KHz (SW4-7)
J15A sets the MCLK Pin 11 to 256KHz.
J15B: MCLK=BCLK (SW4-8)
J15B sets the MCLK Pin 11 to be equal to BCLK.
J16A: POWER-UP (SW5-2)
J16A connects the PUI Pin10 of the W6810 Codec to VCC to power up the device.
J16B: POWER-Down (SW5-3)
J16B connects the PUI Pin10 of the W6810 Codec to GND to power down the device.
J17A: BCLKR = BCLK
J17A connects BCLKR (Pin 9) of the PCM W6810 Codec to BCLK.
