Winbond ISD-T360, User Manual

Page: 26 / 29

26 Voice Solutions in Silicon™
ISD-T360 Reference Design User’s Guide
Setting
Answer Off
To set the Answer Off, press the ON/OFF button until the voice prompt “Answer
off” sounds and the LED displays “OF”. In this mode the DAM will not answer
any in-coming calls. The LED will display “OF” and the number of ICMs, alter-
nately.
Setting the
Announce Only
To set the Announce Only, press the ON/OFF button until the voice prompt
“Announce only” sounds and the LED displays “An”. In this mode, the answer-
ing machine will answer the incoming call and play the OGM, but will not
record an incoming message. The LED will display “OF” and number of ICMs,
alternately.
TO PLAY THE ICMS
(INCOMING
MESSAGES)
When a new ICM is recorded, the New Message LED lights up. To play the
ICM, press the PLAY button. The DAM will begin playing the earliest ICM and
progress to the latest ICM. Simultaneously, the 7-segment display will show
the number of the current message being played. After ICMs are played, the
New Message LED will automatically turn off.
While the ICM is
Being Played, It
Is Possible to:
Feature Buttons
Replay the current message Press the BWD button while the
message is playing
Pause/Resume current message Press the PLAY button to toggle
between Pausing and Resuming the
message.
Stop playing an ICM Press STOP button
Erase the current ICM While playing the message that you
want to delete, press the ERASE button
Skip to next ICM Press FWD button
Go to previous ICM Press BWD button
Adjust volume Press the VOL_UP or VOL_DN button to
increase the volume accordingly
TO ERASE ALL ICMS
(INCOMING
MESSAGES)
While in idle mode, press and hold the ERASE button until you hear the long
beep indicating that all incoming messages have been erased.
NOTE: An incoming message will not be erased if it was not previously
played.
TO RECORD A MEMO
To record a memo, press and hold the MEMO button until the voice prompt
“Memo Recording” is announced. The DAM begins recording the message
and the 7-segment display lists the elapsed time. When you are finished re-
cording, press the STOP button. The machine will return to the idle state. Note
that the recorded memo will be treated as an ICM by the DAM and can be
played during ICM playback.
SPEAKER PHONE
To enable the speakerphone, press the SPK button. Press the SPK button
again to toggle the speakerphone off.