User’s Manual
WIN Enterprises, Inc.
Feb., 2010
30
multi-sector transfer feature. When set to Disabled, the data transfer from and to the
device occurs one sector at a time.
PIO Mode: [Auto]
Selects the PIO mode for the device.
DMA Mode: [Auto]
Selects the DMA mode for the device.
S.M.A.R.T.: [Auto]
S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology). It allows system to
use the SMART protocol to monitor your hard disk status.
32Bit Data Transfer: [Enabled]
Enables or disables 32-bit data transfer. If the host controller does not support 32-bit
data transfer, this menu must be set to [Disabled].
4.4.3 Super IO Configuration
Serial Port1 Address: [3F8/IRQ4]
Selects the Serial Port1 base addresses and IRQ.