Win PL-80120 User Manual Download Page 7

Page: 7 / 65

User’s Manual

WIN Enterprises, Inc.

Feb., 2010

If any of the above items is missing or damaged please contact your dealer or

retailer from whom you purchased the PL-80120. Keep the box and carton if

you plan to ship or store PL-80120 in near future. After you unpack the goods,

inspect and make sure the packaging is intact. Do not plug the power adapter

to the appliance of PL-80120 if you find it appears damaged.

Note: Keep the PL-80120 in the original packaging until you start installation.

1.5 Precautions

Please make sure you properly ground yourself before handling the PL-80120

appliance or other system components. Electrostatic discharge can be easily

damage the PL-80120 appliance.

Do not remove the anti-static packing until you are ready to install the

PL-80120 appliance.

Ground yourself before removing any system component from its protective

anti-static packaging. To ground yourself grasp the expansion slot covers or

other unpainted parts of the computer chassis.

Avoid touching the components within it.

Summary of Contents for PL-80120


































































Search results

Summary of Contents for PL-80120

Reviews:

Related manuals for PL-80120

Brands by name

Popular brands

Win PL-80120, User Manual

Search results

Summary of Contents for PL-80120

Reviews:

Related manuals for PL-80120

Brands by name

Popular brands