WIN Enterprises PL-10510, User Manual

Page: 38 / 52

WIN Enterprises, Inc. 38
this sets an upper limit on Link operational speed by restricting the values
advertised by the Upstream component in its training sequences. When
‘
Auto
’
is
selected HW initialized data will be used.
Clock Power Management
If supported by hardware and set to
‘
Enabled
’
, the device is permitted to use
CLKREQ# signal for power management of Link clock in accordance to protocol
defined in appropriate form factor specification.
Compliance SOS
If supported by hardware and set to
‘
Enabled
’
, this will force LTSSM to send SKP
Ordered Sets between sequences when sending Compliance Pattern or Modified
Compliance Pattern.
Hardware Autonomous Width
If supported by hardware and set to
‘
Disabled
’
, this will disable the hardware
’
s
ability to change link width except width size reduction for the purpose of
correcting unstable link operation.
Hardware Autonomous Speed
If supported by hardware and set to
‘
Disabled
’
, this will disable the hardware
’
s
ability to change link speed except speed rate reduction for the purpose of
correcting unstable link operation.
3.4.9 CSM Configuration