WIN Enterprises MB-73440 User Manual Download Page 13

Page: 13 / 82

MB-73440

Dual channel non-ECC 1866/2133 MHz DDR4 memory up to 32 GB in dual SODIMM socket

BIOS

AMI EFI with CMOS backup in 16MB SPI BIOS with Intel® AMT 11.0 support (AMT supported on i7/i5

SKUs only)

Platform Controller Hub

Integrated PCH-LP (i7/i5/i3: Premium PCH-LP)

2.2. Expansion Busses

PCIe x1 (

Gen3

)

Core™i7/i5/i3,

Lanes 1/2/3/4/6

can be configured to:

LPC bus

SMBus (system)

2.3. Video

GPU

Intel® Generation 9 Graphics integrated in CPU and featured with:

Supports 3 displays (independently/simultaneously) via Display Port/HDMI/LVDS monitors (eDP

optional in place of LVDS)

Encode/transcode high definition (HD) video supported

High definition (HD) video (e.g. Blu-ray DVD) supported

Playback of Blu-ray Disc 3D content via HDMI (HDMI e1.4a)

DirectX Video Acceleration (DXVA2) supported

HEVC/H.265, H.264, M/JPEG, MPEG2, VC1, WMV9, VP8/VP9 HW decode supported

HEVC/H.265, M/JPEG, MPEG2 HW encode supported

Advanced Scheduler 2.0, 1.0 and XPDM supported

Summary of Contents for MB-73440



















































































Search results

Summary of Contents for MB-73440

Reviews:

WIN Enterprises MB-73440, User Manual, Page: 13 / 82

Search results

Summary of Contents for MB-73440

Reviews: