WimTec SKY Series, Assembly And Operating Instructions Manual

Page: 14 / 28

14 Washbasin fitting WimTec SKY
EN
SKY
Congratulations on purchasing the WimTec SKY fitting.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products
WimTec SKY washbasin fitting
6 V without mixer Art.No. 104 448
6 V with mixer Art.No. 104 424
230 V without mixer Art.No. 104 431
230 V with mixer Art.No. 104 417
Delivery scope
Tap housing with electronic module, 230 V power unit or 9 V battery,
magnetic valve, connnection hoses, dirt-filter attachment for corner
valve, mounting material and reflux preventers at variant with mixer.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards
and provisions must be observed! Provide for 230 V / 12 V power
unit outside of the protected zone.
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!